Home > Knowledge > Content
Master these properties to better use and maintain pressure transmitters
Nov 27, 2018


Master these properties to better use and maintain pressure transmitters



As far as pressure transmitters are concerned, it is used to measure the liquid level, density and pressure of liquids, gases or vapors. In terms of skills, it is necessary to strengthen product technology updates and technological innovations. The current product technology update time is long. Although there are achievements in tracking new technologies in research institutes, it is quite difficult to combine productization with enterprises. This makes it difficult for pressure transmitters to make greater progress in the development of technology. In order to make the products of pressure transmitters work better and meet different market demands, it is necessary to increase investment in all aspects. In addition to the introduction of technology, more cooperation between the government and enterprises is needed.

 

Master these properties to better use and maintain pressure transmitters

The pressure transmitter adopts a dedicated integrated module, which realizes accurate measurement and transmission of medium pressure changes of liquid, gas and steam (such as metal rotameter) through fine temperature drift, zero point and nonlinear compensation. Pressure transmitters are used in a wide range of industrial control applications, not only because of their very reliable performance, but also because they can be multi-point controlled and can be set arbitrarily. In the petrochemical and other industries, due to the stability of the pressure transmitter, the measurement accuracy in the production work is guaranteed.

 

→TO THE PRESSURE TRANSMITTER PRODUCT PAGE


Notes on pressure transmitters

 

1: During the pressure transmission process, the following points should be noted: the transmitter and the heat pipe should not be leaked; the pipe must be kept clear, the deposits in the pipe will pop out, and the sensor diaphragm will be damaged. Before starting to use, if the valve is closed, the valve should be opened very carefully and slowly, so as to prevent the measured medium from directly impacting the sensor diaphragm and damaging the sensor diaphragm;

 

2: When measuring steam or other high-temperature medium, use a heat pipe to connect the transmitter and the pipe, and use the pressure on the pipe to pass the change. Before starting to use, if the valve is closed, it should be used when it is used. Carefully and slowly open the valve to prevent the measured medium from directly impacting the sensor diaphragm, thereby damaging the sensor diaphragm;

 

3: Do not touch the diaphragm with a hard object, resulting in damage to the isolation diaphragm;

 

4: The measured medium is not allowed to freeze, otherwise the sensor element isolation diaphragm will be damaged, resulting in damage to the transmitter. If necessary, the transmitter should be temperature-protected to prevent freezing.

 

5: When measuring steam or other high temperature medium, the temperature should not exceed the limit temperature when the transmitter is used. Above the limit temperature used by the pressure transmitter, a heat sink must be used;

 

6: Do not apply voltage higher than 36V to the transmitter, resulting in damage to the transmitter.

 

Analysis of the anti-interference problem of pressure transmitter:

 

1. The pressure transmitter needs to maintain stability after working overtime: Most transmitters will drift after overtime work, so it is necessary to understand the stability of the transmitter before purchasing. This kind of pre-work can be reduced. There will be troubles in the future.

 

2. The package of the pressure transmitter. The package of the transmitter, especially often overlooked, is its frame, however this will gradually reveal its shortcomings in later use. In the purchase of the transmitter must take into account the future working environment of the transmitter, how the humidity, how to install the transmitter, there will be strong impact or vibration.

 

3. What kind of connection is used between the pressure transmitter and other electronic devices. Is it necessary to use a short-distance connection? If a long-distance connection is used.


Master these properties to better use and maintain pressure transmitters

 


Pressure transmitters are widely used in petroleum, chemical, metallurgy, electric power, food, paper, medicine, machinery manufacturing and other industries. With reliable operation, stable performance, convenient installation and use, small size, light weight, high performance and price ratio, it can be widely used in various positive and negative pressure measurement.

 

With the development of science and technology, people have higher and higher requirements for pressure transmitters, and their structural performance is also more and more detailed. Nowadays, the smart transmitters produced have dozens of technical indicators. However, it is impossible for the user, and it is not necessary to verify the technical specifications of the transmitter at the use site, and some indicators will not change. However, understanding and mastering these properties is good for using and maintaining the transmitter.


Master these properties to better use and maintain pressure transmitters


Click here to browse pressure transmitter product!